[BirdOPrey5]

Let me work on that a bit and see what happens...

[jjohns12]

Let me start off with i Love this mod works great!

I did just discover that using your mod increases my servers first byte time by more than .500 ms when enabled if I disable your mod first byte times are good. Keep in mind I am on a shared server but find that much increase strange. Any ideas?

Thanks

[BirdOPrey5]

Not sure... are you using it on "every" page or just on forumhome?

[BirdOPrey5]

What site (or tool?) are you using to determine the time to first byte?

I tried this site - http://www.webpagetest.org/result/131216_C3_GDG/ - but running the test several times with no changes and getting very different numbers each time.. from 0.3 seconds to 1.1 seconds and I haven't even turned the mod on or off.

[jjohns12]

Originally Posted by BirdOPrey5

What site (or tool?) are you using to determine the time to first byte?

I tried this site - http://www.webpagetest.org/result/131216_C3_GDG/ - but running the test several times with no changes and getting very different numbers each time.. from 0.3 seconds to 1.1 seconds and I haven't even turned the mod on or off.

I am using the same tool as you but after looking into it more cause couldn't believe it was just your mod It's my server!

I seen such a improvement due to i am using VB Optimize and it did a great job of covering up my first byte and load times when i enabled your mod the your script gets executed and my real issue is back!

Should have known it was not your work all along Sorry for the trouble! I just need a better server!

P.S. Great Mod!

[BirdOPrey5]

OK... Updated to version 2.2.0.

New to this version-

Added the register_addmember_complete hook to the file as an option. If you enable this hook in settings it may help let you run some other mods that run after default registration such as "Welcome thread" mods.

Also - I'm considering this feature being "in beta" but you can new enable "Frame Mode" which allows access to the form via an IFRAME- this allows you to integrate the form into a 3rd party page like a Wordpress site or custom landing page.

To use "Frame Mode" enable it in the mode options, then make the IFRAME URL-

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Of course if you customized the value of bop5_rfr.php then you need to use the custom value instead of the default file name.

Some of the differences in "Frame Mode" besides displaying the form itself alone is that any errors generated do not bring up the full vBulletin error page because it would be too big to show in a frame and you don't want the forum header, navbar, and footer, etc... So an error, such as a human verify error, simply displays a message to please try again. Also, assuming the registration is completed successfully the success message is also displayed alone without a vBulletin header and footer so it fits better in a frame.

Caution- I have not done much testing with this feature since I have no real need for it- it seems to work though in my VB4 testing. Honestly VB3 testing was even less than VB4- if you need to use this feature please test it yourself to make sure it works once or twice with your chosen settings before relying on it for registrations.

[Sahin]

it is skippin email activation mail. Direct sending password.

[BirdOPrey5]

There is no activation email with this mod- upon registration it emails them a password, that is the point of this mod.

If a user didn't sign up with a real email account they will never get the password and can therefore never log in.

[PAPPACLART]

the register buttom is grayed out when I test so it is nit possible to register?

[webmastersitesi]

how to make this mod check, vbstopforumspam plugin to work together? it allows spammers otherwise

[BirdOPrey5]

Originally Posted by PAPPACLART

the register buttom is grayed out when I test so it is nit possible to register?

For it to ungrey you must enter valid info in the username and email box and agree to the rules if that opion is shown.

If you still have issue please post a link to your site.

Originally Posted by webmastersitesi

how to make this mod check, vbstopforumspam plugin to work together? it allows spammers otherwise

Did you try enabling the hook in the mod options?

[hurricane_sh]

I still use the old version, not sure if there are any changes about how passwords are generated.

I had a member who doesn't know how to copy&paste and mistyped 1(number) and l (letter). It would be great to exclude certain numbers (0 and 1) and letters (o, l), they often cause confusions.

[BirdOPrey5]

Originally Posted by hurricane_sh

I still use the old version, not sure if there are any changes about how passwords are generated.

I had a member who doesn't know how to copy&paste and mistyped 1(number) and l (letter). It would be great to exclude certain numbers (0 and 1) and letters (o, l), they often cause confusions.

Interesting- I will put in some code to not use confusing characters in passwords the next release.

[PAPPACLART]

Originally Posted by BirdOPrey5

For it to ungrey you must enter valid info in the username and email box and agree to the rules if that opion is shown.

If you still have issue please post a link to your site.



Did you try enabling the hook in the mod options?

Yes done all of that. Have it disable for now so will send a link with it activated shortly. Thanks

[jimsflies]

I posted this on your site Joe, hopefully I can get a tip from someone here. Hoping to get a quick answer since it looks bad and is on my live site (trying to avoid taking it off because I know it worked on my test site and on my 3.8 site).

For some reason, on my newly upgraded (from 3.8 to 4.2.2) the human verification element is showing all the time below the RFR box. Any idea how to fix this? It works fine on my test site and I think I have all the settings the same.