[Elite_360_]

Originally Posted by Judith2

I have tried every version, these 2013-11-05-23:00 and it does not work. This is a german board.

1. Did you uninstall the 1.3.1 or lower version?
2. On Usercp Edit Profile->Holiday Visual Effects: is this on?

3. try this for start date 2013-11-05-00:00
4. try this for finish date 2013-11-07-00:00

[Judith2]

Yeah, it works now!! Thanks a lot!!!

It was the start and the finish dates!

Many thanks

[scottct1]

Do you have a copy of 1.3.1 that you can post.

I just upgraded and didn't remove the product for 1.3.1. but did remove the files and now it won't uninstall because the uninstall file is missing.

Thanks!

[gbicar]

Originally Posted by Elite_360_

The mod is the same as before just a new layout and you now can custom most images, It always had a start date and end date just can't use the date picker because it used TIME_STAMP and there was a Timezone bug I notice when I was working on it. If you have it installed just enable it for an admin so nobody else will see. Or are you having trouble with the date?

Well the only time i think it just had just an on and off option was when it was "e360 snowstorm" but now its more that one script i can add an option to disable the date but you have to turn on and off each script manually.

As for demo to setup or demo how it looks?

to me it does not work, yesterday I tried to set the start and end dates so
2013-11-06-20:00
2013-11-06-20:02

to see if you activated the xmas light for two minutes, but nothing ...
then I tried snowstorm, nothing ...
if you can not have a button for activating and deactivating manual, I think that I will install the old mod

[Elite_360_]

Originally Posted by gbicar

to me it does not work, yesterday I tried to set the start and end dates so
2013-11-06-20:00
2013-11-06-20:02

to see if you activated the xmas light for two minutes, but nothing ...
then I tried snowstorm, nothing ...
if you can not have a button for activating and deactivating manual, I think that I will install the old mod

you must not have the main setting enabled and the date works on the vb user timezone guest will work on forum timezone default

The mod will work if it is config right


I'm going to add a setting where you can disable the date and add a popup calender for the date

[gbicar]

I thank you for trying to find alternatives, unfortunately vbullettin 4.xx Time has bugs that have not yet been resolved ...
you made a mod beautiful but complicated in some ways, do not you think that many would prefer something simpler? I wish they were the admin of our forum to enable and disable the mod at will, if you turn on automatically and it conflicts with something and there's nobody that's going to turn it off? I do not want this
however, the same compliments for your work and I'm sorry, but most things are simple, and most work better.
IMHO
best regards

sorry for my bad English

[Elite_360_]

Originally Posted by gbicar

I thank you for trying to find alternatives, unfortunately vbullettin 4.xx Time has bugs that have not yet been resolved ...
you made a mod beautiful but complicated in some ways, do not you think that many would prefer something simpler? I wish they were the admin of our forum to enable and disable the mod at will, if you turn on automatically and it conflicts with something and there's nobody that's going to turn it off? I do not want this
however, the same compliments for your work and I'm sorry, but most things are simple, and most work better.
IMHO
best regards

sorry for my bad English

i know 2.0.1 works on any version of vbulletin 4.2.0 and above i'm using it on 4.2.2.

Did you uninstall the old version? You could have conflicts with other JavaScripts on your site.

As for you question about JavaScripts conflicts does not do any with vbulletin maybe other mods but the only thing that will happen is some JavaScripts will work some will not.

pm me a link to your site with a demo username and pass and enable a script to work for my user group and i will tell you if you have it config right or having a javascript issue

[gbicar]

I uninstalled 2.0.1 and put 1.3.1 (I had not proven), missing bats halloween but for me it's ok, it's what I wanted
thank you very much

[Elite_360_]

Originally Posted by gbicar

I uninstalled 2.0.1 and put 1.3.1 (I had not proven), missing bats halloween but for me it's ok, it's what I wanted
thank you very much

I had not proven? "What have you not proven?"

Well 1.3.1 setting works the same as 2.0.1 but there a Time-Zone bug in 1.3.1 and not cache and missing a bunch of features you must be having a problem setting up the dates. If you don't give the correct info i can't help you and i see you Mark as Uninstalled so i will not provide you with anymore Support for this mod as i do Support for free and my mods are free. All my mods i made for my site and i felt like sharing them with the vbulletin community i do not work for vbulletin or get any $ for my mods.

[gbicar]

I'm not interested to start automatically with the date and time, 1.3.1 is what it does for me
ON and OFF when and how I want
thanks

[IceTech]

Hello...first, I would like to say you have done a great job with this mod!! My issue is I 'm running vb 4.2.1 & i'm trying to get the xmas gifts to work...I went into my template setting and found the e360 holiday fx templates but not one for the falling or floating Christmas gifts for Christmas day...I tried to re install in case I did something wrong but still not working...could you help me out please to get it working?? Thank you in advance

[Elite_360_]

Originally Posted by IceTech

Hello...first, I would like to say you have done a great job with this mod!! My issue is I 'm running vb 4.2.1 & i'm trying to get the xmas gifts to work...I went into my template setting and found the e360 holiday fx templates but not one for the falling or floating Christmas gifts for Christmas day...I tried to re install in case I did something wrong but still not working...could you help me out please to get it working?? Thank you in advance

a pic of your Christmas day setting

[Elite_360_]

Update to 2.0.2
New: Added a Date & Time Picker
Change some phrases

[IceTech]

Originally Posted by Elite_360_

a pic of your Christmas day setting

Hello thank you but when I loaded the new 2.0.2..it worked....something was fixed & again thank you for a awesome mod!!

[bzcomputers]

This mod is still creating server load when "Disabled" under the Main Settings options. I currently have to go into the Product Manager and disable it there to get it to stop.

When disabled in the Main Settings I am still seeing caching and calls to these items:

/e360mods/holiday/hooks/cache_templates.php
/e360mods/holiday/hooks/init_startup.php
/e360mods/holiday/hooks/parse_templates.php
/e360mods/holiday/hooks/process_templates_complete.php
/e360mods/holiday/hooks/template_groups.php
e360_holiday_setting
e360_holiday