[raynestorm]

Attached are the screen shots.
Thanks.

[Lynne]

For the option, you cut off the screen right where it says Display Page - do you have it set to Edit Profile? I think it needs to be for this to work.

[raynestorm]

Originally Posted by Lynne

For the option, you cut off the screen right where it says Display Page - do you have it set to Edit Profile? I think it needs to be for this to work.

You are right! It does have to be set to Edit Profile. I had set it to "Other", but I can't remember why, exactly. Display Page only controls where the field contents is displayed?

Thanks for the help!

[arshadeomran]

Originally Posted by Lynne

Using your User Profile Fields on your site

This article is written with the assumption that you have already created your own User Profile Fields in the User Profile Field Manager. If you need help with this, you may read about it in the manual here - http://www.vbulletin.com/docs/html/profile

For the Purposes of this article, I will be referring to "fieldx" as the name of your profile field. Your real name will be found in the User Profile Manager in the "Name" column - field1, field2, etc.


First thing to do is figure out which fields you want to add to your postbit. Go to your Admincp > User Profile Fields > User Profile Field Manager and note both the Field Name (field1, field2, etc) and the Category the field is in (see image 1). The Profile Fields are listed under their Category Title on this page. It should either be "(Uncategorized)" or have some other category listed. To then get the Category ID, go to User Profile Field Categories, click to Edit the category you want the ID of, and it will be listed at the top - id x (see image 2). Uncategorized Categories have no Category ID.

Image 1:


Image 2:

So, now that you have a list of field ids and category ids, you can now easily add them to your postbit.

First make sure your hook system is active (it is turned off by default). Go to Admincp > Settings > Products/Hook System > Enable/Disable Hook System > Yes.

Now, go to Admincp > Products & Hooks > Manage Hooks and click the link that says "[Add New Hook]". In that new hook, set the following:

Hook is Active: Yes
Hook Location: conversation_userstats
Title: Show Profile Fields in Postbit
Template Name: conversation_fields
Hook Arguments: conversation=conversation
SAVE

Now go to Admincp > Styles & Templates > Style Manager > Add New Template and on that page, set the following:

Title: conversation_fields
Template:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

For each field you want shown, you will need to add this code under that line:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Replace the X in "FieldX" (three times) with the fieldid and, if your field is in a Category other than Uncategoried, then replace "default" with "categoryY_title" where Y is the category id.

So, for instance, say I have the following I want to add:

Name Category
field5 (uncategoried)
field7 New Cat(id 1)

Then my template would look like this:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

That's it!

If running 5.1.0, there is a code fix to apply here.

Hi Lynne,
I want to place the new fields of postbit below number of post.
How can I do it?
Thanks

[Lynne]

Originally Posted by arshadeomran

Hi Lynne,
I want to place the new fields of postbit below number of post.
How can I do it?
Thanks

There isn't a hook there, so you would need to add the code directly to the template.

[arshadeomran]

Originally Posted by Lynne

There isn't a hook there, so you would need to add the code directly to the template.

I have used the codes that you wrote in first post. I want only change position of field in postbit so that "number of post" must be the latest field not second field.
Thank you.

[heredia21]

Does this no longer working on 5.1.8 Alpha 6? All of a sudden the extra profile fields stopped showing.