[iogames]

Wow! can I talk to u in private?

[Jasem]

Wow!, Thank you very much

[Flamerokz]

Thanks! One of my members needed this

[BigDog56]

Can't get the color or size to work

[ChU v2]

Originally Posted by BigDog56

Can't get the color or size to work

Make sure that you've edited the fieldXX with the correct field numbers.

[obmob]

WOW, and this would set a default font, size, color in user posts?

This is a must!
Will test... thanks!

[M0Dy]

Thank you

[ChU v2]

Your welcome

[imported_mindcrime]

I'm having some issue installing this. Where in the template? The postbit for all of the templates that are on the site?

Also, with regard to the fields. I have put them into the code as they are (font face, color, etc.) and still not working.

[ChU v2]

Originally Posted by imported_mindcrime

I'm having some issue installing this. Where in the template? The postbit for all of the templates that are on the site?

Also, with regard to the fields. I have put them into the code as they are (font face, color, etc.) and still not working.

It says specifically in the instructions where to place the code. You should FIND and ADD BELOW.

Add the code in the right spot and you should be fine.

[imported_mindcrime]

Originally Posted by ChU v2

It says specifically in the instructions where to place the code. You should FIND and ADD BELOW.

Add the code in the right spot and you should be fine.

I added it into the legacy postbit as was referred to in shadow's post. The instructions with this mod state edit template but not where.

I put it in presumably where it is supposed to be, however, it is not working. Could you please be more specific for us code-tarded folks. Thanks. Also, can you clarify - the instructions say:

FIND:
<!-- message -->
<div id="post_message_$post[postid]">$post[message]</div>
<!-- / message -->

REPLACE WITH:

[Alfa1]

Yes, that would be handy!

Searching templates for the code

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

shows two templates that contain this code:
postbit and postbit_legacy

postbit works.

I only want members to be able to set font type, color and italic. The field number for this are:
font type: 23
color: 24
italic : 25

I have color and italic working, but not font type.

My current code is:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Please advise.

Does higher / lower case matter when defining fonts?

[ChU v2]

Originally Posted by imported_mindcrime

I added it into the legacy postbit as was referred to in shadow's post. The instructions with this mod state edit template but not where.

I put it in presumably where it is supposed to be, however, it is not working. Could you please be more specific for us code-tarded folks. Thanks. Also, can you clarify - the instructions say:

FIND:
<!-- message -->
<div id="post_message_$post[postid]">$post[message]</div>
<!-- / message -->

REPLACE WITH:

I've just downloaded the instructions and it says:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

[ChU v2]

Originally Posted by Alfa1

Yes, that would be handy!

Searching templates for the code

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

shows two templates that contain this code:
postbit and postbit_legacy

postbit works.

I only want members to be able to set font type, color and italic. The field number for this are:
font type: 23
color: 24
italic : 25

I have color and italic working, but not font type.

My current code is:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Please advise.

Does higher / lower case matter when defining fonts?

Yes the code shows up in two templates because it depends on which you use Postbit or postbit legacy, this option can be toggled in vBOptions.

As for your problem, the way the code works it HAS to have the the size code in there. my suggestion to is leave the code the way it is and change the font size PX to the desired size you want like so:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

OR

You can also still make the profile field, but only make 1 option like 15 or whatever. Then set it to default first option and make it so the member can not edit. The first option might be easier.